FS20X Flame Detector

Based on the foundation of the highly successful and reliable SS4 Flame Detector, the FS20X Flame Detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS Flame Detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.
 
Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminants. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.
 
The FS20X Flame Detector uses advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector’s UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X’s patented* WideBand IR™, Near Band IR and Visible sensors will still alarm to fire but at a reduced sensitivity and slower response time.
 
Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The Master Microprocessor performs high-speed digital sampling and signal processing calculations; while the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility; and additional memory for storing Event Log and FirePic™ data.
 
The FS20X Flame Detector has a detection range in excess of 200 feet (very high sensitivity setting) for the detection of a one square-foot Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers’ detectors.
 
Additional Features and Benefits
	
Patented* WideBand IR™ Infrared combined with Ultraviolet
	
Detection range greater than 200 feet to 1 sq. ft. heptane fire
	
Patented* Electronic Frequency Analysis
	
Visible Sensor for optimum false alarm rejection
	
Selectable detection sensitivities
	
Solar blind 90° full 100% cone-of-vision
	
Dual Microprocessors for reliable performance
	
Real-time clock for accurate time dating of events
	
FirePic™ — Up to 6 pre-fire event data storage
	
Event log — Up to 200 events with date and time stamp
	
Built-in RS-485 ModBus Communication
	
Built-in non-isolated 4-20 mA analog output (sink or source)
	
Alarm, Fault and Fire Verification relays.
	
Automatic Optical Path and Electronic Self-Test
	
Widest operating temperature range
	
Patented* Electronics Module for components protection with plug-in terminations for easy field installation
	
Two ¾” NPT OR 25mm conduit entries
	
Low power consumption
	
High RFI and EMI immunity
	
FM approved
 
Benefits
	
Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
	
Arc welding immunity
	
False alarm rejection for all environmental conditions
	
Minimal maintenance for trouble-free operation
	
PC software and Interface Module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
	
Suitable for a wide variety of applications.